Interrupt Controller Control Register (EL1)
Controls aspects of the behavior of the GIC CPU interface and provides information about the features implemented.
This register is banked between ICC_CTLR_EL1 and ICC_CTLR_EL1_S and ICC_CTLR_EL1_NS.
AArch64 System register ICC_CTLR_EL1 bits [31:0] (ICC_CTLR_EL1_S) are architecturally mapped to AArch32 System register ICC_CTLR[31:0] (ICC_CTLR_S).
AArch64 System register ICC_CTLR_EL1 bits [31:0] (ICC_CTLR_EL1_NS) are architecturally mapped to AArch32 System register ICC_CTLR[31:0] (ICC_CTLR_NS).
This register is present only when (GICv3 is implemented or FEAT_GCIE_LEGACY is implemented) and FEAT_AA64 is implemented. Otherwise, direct accesses to ICC_CTLR_EL1 are UNDEFINED.
ICC_CTLR_EL1 is a 64-bit register.
This register has the following instances:
| 63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RES0 | |||||||||||||||||||||||||||||||
| RES0 | ExtRange | RSS | RES0 | A3V | SEIS | IDbits | PRIbits | RES0 | PMHE | RES0 | EOImode | CBPR | |||||||||||||||||||
Reserved, RES0.
Extended INTID range.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| ExtRange | Meaning |
|---|---|
| 0b0 | CPU interface does not support INTIDs in the range 1024..8191.
Arm strongly recommends that the IRI is not configured to deliver interrupts in this range to a PE that does not support them. |
| 0b1 | CPU interface supports INTIDs in the range 1024..8191
|
If EL3 is implemented, ICC_CTLR_EL1.ExtRange is an alias of ICC_CTLR_EL3.ExtRange.
Access to this field is RO.
Range Selector Support.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| RSS | Meaning |
|---|---|
| 0b0 |
Targeted SGIs with affinity level 0 values of 0 - 15 are supported. |
| 0b1 |
Targeted SGIs with affinity level 0 values of 0 - 255 are supported. |
Access to this field is RO.
Reserved, RES0.
Affinity 3 Valid.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| A3V | Meaning |
|---|---|
| 0b0 |
The CPU interface logic only supports zero values of Affinity 3 in SGI generation System registers. |
| 0b1 |
The CPU interface logic supports nonzero values of Affinity 3 in SGI generation System registers. |
If EL3 is implemented, this bit is an alias of ICC_CTLR_EL3.A3V.
Access to this field is RO.
SEI Support. Indicates whether the CPU interface supports local generation of SEIs:
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SEIS | Meaning |
|---|---|
| 0b0 |
The CPU interface logic does not support local generation of SEIs. |
| 0b1 |
The CPU interface logic supports local generation of SEIs. |
If EL3 is implemented, this bit is an alias of ICC_CTLR_EL3.SEIS.
Access to this field is RO.
Identifier bits. The number of physical interrupt identifier bits supported:
The value of this field is an IMPLEMENTATION DEFINED choice of:
| IDbits | Meaning |
|---|---|
| 0b000 |
16 bits. |
| 0b001 |
24 bits. |
All other values are reserved.
If EL3 is implemented, this field is an alias of ICC_CTLR_EL3.IDbits.
Access to this field is RO.
Priority bits. The number of priority bits implemented, minus one.
An implementation that supports two Security states must implement at least 32 levels of physical priority (5 priority bits).
An implementation that supports only a single Security state must implement at least 16 levels of physical priority (4 priority bits).
This field always returns the number of priority bits implemented, regardless of the Security state of the access or the value of GICD_CTLR.DS.
For physical accesses, this field determines the minimum value of ICC_BPR0_EL1.
If EL3 is implemented, physical accesses return the value from ICC_CTLR_EL3.PRIbits.
If EL3 is not implemented, physical accesses return the value from this field.
This field has an IMPLEMENTATION DEFINED value.
Access to this field is RO.
Reserved, RES0.
Priority Mask Hint Enable. Controls whether the priority mask register is used as a hint for interrupt distribution:
| PMHE | Meaning |
|---|---|
| 0b0 |
Disables use of ICC_PMR_EL1 as a hint for interrupt distribution. |
| 0b1 |
Enables use of ICC_PMR_EL1 as a hint for interrupt distribution. |
If EL3 is implemented, this bit is an alias of ICC_CTLR_EL3.PMHE. Whether this bit can be written as part of an access to this register depends on the value of GICD_CTLR.DS:
If EL3 is not implemented, it is IMPLEMENTATION DEFINED whether this bit is read-only or read/write:
Accessing this field has the following behavior:
Reserved, RES0.
EOI mode for the current Security state. Controls whether a write to an End of Interrupt register also deactivates the interrupt:
| EOImode | Meaning |
|---|---|
| 0b0 |
ICC_EOIR0_EL1 and ICC_EOIR1_EL1 provide both priority drop and interrupt deactivation functionality. Accesses to ICC_DIR_EL1 are UNPREDICTABLE. |
| 0b1 |
ICC_EOIR0_EL1 and ICC_EOIR1_EL1 provide priority drop functionality only. ICC_DIR_EL1 provides interrupt deactivation functionality. |
The Secure ICC_CTLR_EL1.EOImode is an alias of ICC_CTLR_EL3.EOImode_EL1S.
The Non-secure ICC_CTLR_EL1.EOImode is an alias of ICC_CTLR_EL3.EOImode_EL1NS
Common Binary Point Register. Controls whether the same register is used for interrupt preemption of both Group 0 and Group 1 interrupts:
| CBPR | Meaning |
|---|---|
| 0b0 | ICC_BPR0_EL1 determines the preemption group for Group 0 interrupts only. ICC_BPR1_EL1 determines the preemption group for Group 1 interrupts. |
| 0b1 |
ICC_BPR0_EL1 determines the preemption group for both Group 0 and Group 1 interrupts. |
If EL3 is implemented:
If EL3 is not implemented, this bit is read/write.
The reset behavior of this field is:
Accessing this field has the following behavior:
Accesses to this register use the following encodings in the System register encoding space:
MRS <Xt>, ICC_CTLR_EL1
(op0 = 0b11, op1 = 0b000, CRn = 0b1100, CRm = 0b1100, op2 = 0b100)
if !((IsFeatureImplemented(FEAT_GICv3) || IsFeatureImplemented(FEAT_GCIE_LEGACY)) && IsFeatureImplemented(FEAT_AA64)) then Undefined(); elsif HaveEL(EL3) && !(EffectivelyAtEL0InHost() || EffectivelyAtEL0NotInHost() || PSTATE.EL == EL3) && EL3SDDUndefPriority() && SCR_EL3().[IRQ,FIQ] == '11' then Undefined(); elsif PSTATE.EL == EL0 then Undefined(); elsif PSTATE.EL == EL1 then if IsFeatureImplemented(FEAT_GCIE_LEGACY) && (ICH_VCTLR_EL2().V3 == '0' || !EL2Enabled() || !(ICH_HCR_EL2().TC == '1' || HCR_EL2().FMO == '1' || HCR_EL2().IMO == '1')) then Undefined(); elsif ICC_SRE_EL1().SRE == '0' then AArch64_SystemAccessTrap(EL1, 0x18); elsif EL2Enabled() && ICH_HCR_EL2().TC == '1' then AArch64_SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && HCR_EL2().FMO == '1' then X{64}(t) = ICV_CTLR_EL1(); elsif EL2Enabled() && HCR_EL2().IMO == '1' then X{64}(t) = ICV_CTLR_EL1(); elsif HaveEL(EL3) && SCR_EL3().[IRQ,FIQ] == '11' then if EL3SDDUndef() then Undefined(); else AArch64_SystemAccessTrap(EL3, 0x18); end; elsif HaveEL(EL3) then if EffectiveSCR_EL3_NS() == '0' then X{64}(t) = ICC_CTLR_EL1_S(); else X{64}(t) = ICC_CTLR_EL1_NS(); end; else X{64}(t) = ICC_CTLR_EL1(); end; elsif PSTATE.EL == EL2 then if IsFeatureImplemented(FEAT_GCIE_LEGACY) then Undefined(); elsif ICC_SRE_EL2().SRE == '0' then AArch64_SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && SCR_EL3().[IRQ,FIQ] == '11' then if EL3SDDUndef() then Undefined(); else AArch64_SystemAccessTrap(EL3, 0x18); end; elsif HaveEL(EL3) then if EffectiveSCR_EL3_NS() == '0' then X{64}(t) = ICC_CTLR_EL1_S(); else X{64}(t) = ICC_CTLR_EL1_NS(); end; else X{64}(t) = ICC_CTLR_EL1(); end; elsif PSTATE.EL == EL3 then if IsFeatureImplemented(FEAT_GCIE_LEGACY) then Undefined(); elsif ICC_SRE_EL3().SRE == '0' then AArch64_SystemAccessTrap(EL3, 0x18); else if EffectiveSCR_EL3_NS() == '0' then X{64}(t) = ICC_CTLR_EL1_S(); else X{64}(t) = ICC_CTLR_EL1_NS(); end; end; end;
MSR ICC_CTLR_EL1, <Xt>
(op0 = 0b11, op1 = 0b000, CRn = 0b1100, CRm = 0b1100, op2 = 0b100)
if !((IsFeatureImplemented(FEAT_GICv3) || IsFeatureImplemented(FEAT_GCIE_LEGACY)) && IsFeatureImplemented(FEAT_AA64)) then Undefined(); elsif HaveEL(EL3) && !(EffectivelyAtEL0InHost() || EffectivelyAtEL0NotInHost() || PSTATE.EL == EL3) && EL3SDDUndefPriority() && SCR_EL3().[IRQ,FIQ] == '11' then Undefined(); elsif PSTATE.EL == EL0 then Undefined(); elsif PSTATE.EL == EL1 then if IsFeatureImplemented(FEAT_GCIE_LEGACY) && (ICH_VCTLR_EL2().V3 == '0' || !EL2Enabled() || !(ICH_HCR_EL2().TC == '1' || HCR_EL2().FMO == '1' || HCR_EL2().IMO == '1')) then Undefined(); elsif ICC_SRE_EL1().SRE == '0' then AArch64_SystemAccessTrap(EL1, 0x18); elsif EL2Enabled() && ICH_HCR_EL2().TC == '1' then AArch64_SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && HCR_EL2().FMO == '1' then ICV_CTLR_EL1() = X{64}(t); elsif EL2Enabled() && HCR_EL2().IMO == '1' then ICV_CTLR_EL1() = X{64}(t); elsif HaveEL(EL3) && SCR_EL3().[IRQ,FIQ] == '11' then if EL3SDDUndef() then Undefined(); else AArch64_SystemAccessTrap(EL3, 0x18); end; elsif HaveEL(EL3) then if EffectiveSCR_EL3_NS() == '0' then ICC_CTLR_EL1_S() = X{64}(t); else ICC_CTLR_EL1_NS() = X{64}(t); end; else ICC_CTLR_EL1() = X{64}(t); end; elsif PSTATE.EL == EL2 then if IsFeatureImplemented(FEAT_GCIE_LEGACY) then Undefined(); elsif ICC_SRE_EL2().SRE == '0' then AArch64_SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && SCR_EL3().[IRQ,FIQ] == '11' then if EL3SDDUndef() then Undefined(); else AArch64_SystemAccessTrap(EL3, 0x18); end; elsif HaveEL(EL3) then if EffectiveSCR_EL3_NS() == '0' then ICC_CTLR_EL1_S() = X{64}(t); else ICC_CTLR_EL1_NS() = X{64}(t); end; else ICC_CTLR_EL1() = X{64}(t); end; elsif PSTATE.EL == EL3 then if IsFeatureImplemented(FEAT_GCIE_LEGACY) then Undefined(); elsif ICC_SRE_EL3().SRE == '0' then AArch64_SystemAccessTrap(EL3, 0x18); else if EffectiveSCR_EL3_NS() == '0' then ICC_CTLR_EL1_S() = X{64}(t); else ICC_CTLR_EL1_NS() = X{64}(t); end; end; end;
Version 2026.09 — Copyright © 2010-2026 Arm Limited or its affiliates.
This site is provided as a community resource and is NOT affiliated with nor endorsed by Arm Limited.