Sampling Filter Control Register
Controls sample filtering. The filter is the logical AND of the filters controlled by FDS, FnE, FL, FT, and FE bits. For example, if PMSFCR_EL1.FE is 1 and PMSFCR_EL1.FT is 1, then only samples including the selected types and the selected events will be recorded.
This register is present only when FEAT_SPE is implemented. Otherwise, direct accesses to PMSFCR_EL1 are UNDEFINED.
PMSFCR_EL1 is a 64-bit register.
| 63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RES0 | TYPEm | RES0 | nPBT | RES0 | |||||||||||||||||||||||||||
| RES0 | TYPE | RES0 | FDS | FnE | FL | FT | FE | ||||||||||||||||||||||||
Reserved, RES0.
| 4 | 3 | 2 | 1 | 0 |
| SIMDm | FPm | STm | LDm | Bm |
SIMD filter mask.
| SIMDm | Meaning |
|---|---|
| 0b0 |
PMSFCR_EL1.SIMD controls whether SIMD operations are recorded as part of a Boolean-OR filter with other masked operation type filter controls. |
| 0b1 |
PMSFCR_EL1.SIMD controls whether SIMD operations are recorded as part of a Boolean-AND filter with other unmasked operation type filter controls. |
This field is ignored by the PE when PMSFCR_EL1.FT is 0.
The reset behavior of this field is:
Floating-point filter mask.
| FPm | Meaning |
|---|---|
| 0b0 |
PMSFCR_EL1.FP controls whether floating-point operations are recorded as part of a Boolean-OR filter with other masked operation type filter controls. |
| 0b1 |
PMSFCR_EL1.FP controls whether floating-point operations are recorded as part of a Boolean-AND filter with other unmasked operation type filter controls. |
This field is ignored by the PE when PMSFCR_EL1.FT is 0.
The reset behavior of this field is:
Store filter mask.
| STm | Meaning |
|---|---|
| 0b0 |
PMSFCR_EL1.ST controls whether store operations are recorded as part of a Boolean-OR filter with other masked operation type filter controls. |
| 0b1 |
PMSFCR_EL1.ST controls whether store operations are recorded as part of a Boolean-AND filter with other unmasked operation type filter controls. |
This field is ignored by the PE when PMSFCR_EL1.FT is 0.
The reset behavior of this field is:
Load filter mask.
| LDm | Meaning |
|---|---|
| 0b0 |
PMSFCR_EL1.LD controls whether load operations are recorded as part of a Boolean-OR filter with other masked operation type filter controls. |
| 0b1 |
PMSFCR_EL1.LD controls whether load operations are recorded as part of a Boolean-AND filter with other unmasked operation type filter controls. |
This field is ignored by the PE when PMSFCR_EL1.FT is 0.
The reset behavior of this field is:
Branch filter mask.
| Bm | Meaning |
|---|---|
| 0b0 |
PMSFCR_EL1.B controls whether branch operations are recorded as part of a Boolean-OR filter with other masked operation type filter controls. |
| 0b1 |
PMSFCR_EL1.B controls whether branch operations are recorded as part of a Boolean-AND filter with other unmasked operation type filter controls. |
This field is ignored by the PE when PMSFCR_EL1.FT is 0.
The reset behavior of this field is:
Reserved, RES0.
Previous branch target address packet sample disable. Disables recording of Previous branch target address packets.
| nPBT | Meaning |
|---|---|
| 0b0 |
Previous branch target address packet recording is not disabled by this control. |
| 0b1 |
Previous branch target address packet recording disabled. |
If this field is 0, then there might be IMPLEMENTATION SPECIFIC impacts on the performance of the PE while profiling is enabled.
For more information, see Controlling the data that is collected.
The reset behavior of this field is:
Reserved, RES0.
Reserved, RES0.
| 4 | 3 | 2 | 1 | 0 |
| SIMD | FP | ST | LD | B |
SIMD filter enable.
| SIMD | Meaning |
|---|---|
| 0b0 | If PMSFCR_EL1.SIMDm is 1, then record only operations that are not SIMD operations. Otherwise, do not record SIMD operations, unless allowed by another operation type filter. |
| 0b1 | If PMSFCR_EL1.SIMDm is 1, then record only operations that are SIMD operations. Otherwise, record all SIMD operations. |
This field is ignored by the PE and no records are removed by this filter when any of the following apply:
For filtering purposes, SIMD operations means all Advanced SIMD, SVE, and SME SIMD operations.
The reset behavior of this field is:
Reserved, RES0.
Floating-point filter enable.
| FP | Meaning |
|---|---|
| 0b0 | If PMSFCR_EL1.FPm is 1, then record only operations that are not floating-point operations. Otherwise, do not record floating-point operations, unless allowed by another operation type filter. |
| 0b1 | If PMSFCR_EL1.FPm is 1, then record only operations that are floating-point operations. Otherwise, record all floating-point operations. |
This field is ignored by the PE and no records are removed by this filter when any of the following apply:
For filtering purposes, floating-point operations means all scalar, Advanced SIMD, SVE, and SME floating-point operations, as defined by the FP_SPEC event.
The reset behavior of this field is:
Reserved, RES0.
Store filter enable.
| ST | Meaning |
|---|---|
| 0b0 | If FEAT_SPE_EFT is implemented and PMSFCR_EL1.STm is 1, then record only operations that are not store operations. Otherwise, do not record store operations, unless allowed by another operation type filter. |
| 0b1 | If FEAT_SPE_EFT is implemented and PMSFCR_EL1.STm is 1, then record only operations that are store operations. Otherwise, record all store operations. |
This field is ignored by the PE and no records are removed by this filter when any of the following apply:
For filtering purposes, store operations includes vector stores and all atomic operations.
The reset behavior of this field is:
Load filter enable.
| LD | Meaning |
|---|---|
| 0b0 | If FEAT_SPE_EFT is implemented and PMSFCR_EL1.LDm is 1, then record only operations that are not load operations. Otherwise, do not record load operations, unless allowed by another operation type filter. |
| 0b1 | If FEAT_SPE_EFT is implemented and PMSFCR_EL1.LDm is 1, then record only operations that are load operations. Otherwise, record all load operations. |
This field is ignored by the PE and no records are removed by this filter when any of the following apply:
For filtering purposes, load operations includes vector loads and atomic operations that return a value to the PE.
The reset behavior of this field is:
Branch filter enable.
| B | Meaning |
|---|---|
| 0b0 | If FEAT_SPE_EFT is implemented and PMSFCR_EL1.Bm is 1, then record only operations that are not branch operations. Otherwise, do not record branch operations. |
| 0b1 | If FEAT_SPE_EFT is implemented and PMSFCR_EL1.Bm is 1, then record only operations that are branch operations. Otherwise, record all branch operations. |
This field is ignored by the PE and no records are removed by this filter when any of the following apply:
For filtering purposes, branch operations includes exception returns.
The reset behavior of this field is:
Reserved, RES0.
Filter by Data Source.
| FDS | Meaning |
|---|---|
| 0b0 |
Data Source filtering disabled. |
| 0b1 |
Data Source filtering enabled. Samples of load instructions reporting a Data Source not selected by PMSDSFR_EL1 will not be recorded. |
If PMSFCR_EL1.FDS is 1 and PMSDSFR_EL1 is zero, then no load operations with a Data Source will be recorded.
Load operations without a Data Source and other sampled operations are unaffected by this field.
The reset behavior of this field is:
Reserved, RES0.
Filter by event, inverted.
| FnE | Meaning |
|---|---|
| 0b0 |
Inverted event filtering disabled. |
| 0b1 |
Inverted event filtering enabled. Samples including the events selected by PMSNEVFR_EL1 will not be recorded. |
If any of the following are true, then for each sampled operation, it is CONSTRAINED UNPREDICTABLE whether the sample is discarded or the PE behaves as if PMSFCR_EL1.FnE is 0:
The reset behavior of this field is:
Reserved, RES0.
Filter by latency.
| FL | Meaning |
|---|---|
| 0b0 |
Latency filtering disabled. |
| 0b1 |
Latency filtering enabled. Samples with a total latency less than PMSLATFR_EL1.MINLAT will not be recorded. |
If PMSFCR_EL1.FL is 1 and PMSLATFR_EL1.MINLAT is zero, then for each sampled operation, it is CONSTRAINED UNPREDICTABLE whether the sample is discarded or the PE behaves as if PMSFCR_EL1.FL is 0.
The reset behavior of this field is:
Filter by type. The filter is controlled by the TYPE and, if FEAT_SPE_EFT is implemented, TYPEm fields.
| FT | Meaning |
|---|---|
| 0b0 |
Type filtering disabled. |
| 0b1 |
Type filtering enabled. Samples not one of the selected types will not be recorded. |
Type filtering filters according to the type of the sampled operation.
If FEAT_SPE_EFT is not implemented, PMSFCR_EL1.FT is 1, and the PMSFCR_EL1.{ST, LD, B} bits are all zero, then for each sampled operation, it is CONSTRAINED UNPREDICTABLE whether the sample is discarded or the PE behaves as if PMSFCR_EL1.FT is 0.
For more information, see Filtering by operation type.
The reset behavior of this field is:
Filter by event.
| FE | Meaning |
|---|---|
| 0b0 |
Event filtering disabled. |
| 0b1 |
Event filtering enabled. Samples not including the events selected by PMSEVFR_EL1 will not be recorded. |
If any of the following are true, then for each sampled operation, it is CONSTRAINED UNPREDICTABLE whether the sample is discarded or the PE behaves as if PMSFCR_EL1.FE is 0:
The reset behavior of this field is:
Accesses to this register use the following encodings in the System register encoding space:
MRS <Xt>, PMSFCR_EL1
(op0 = 0b11, op1 = 0b000, CRn = 0b1001, CRm = 0b1001, op2 = 0b100)
if !IsFeatureImplemented(FEAT_SPE) then Undefined(); elsif HaveEL(EL3) && !(EffectivelyAtEL0InHost() || EffectivelyAtEL0NotInHost() || PSTATE.EL == EL3) && EL3SDDUndefPriority() && CheckMDCR_EL3_NSPBTrap() then Undefined(); elsif PSTATE.EL == EL0 then Undefined(); elsif PSTATE.EL == EL1 then if EL2Enabled() && IsFeatureImplemented(FEAT_FGT) && (!HaveEL(EL3) || SCR_EL3().FGTEn == '1') && HDFGRTR_EL2().PMSFCR_EL1 == '1' then AArch64_SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && MDCR_EL2().TPMS == '1' then AArch64_SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && CheckMDCR_EL3_NSPBTrap() then if EL3SDDUndef() then Undefined(); else AArch64_SystemAccessTrap(EL3, 0x18); end; else X{64}(t) = PMSFCR_EL1(); end; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && CheckMDCR_EL3_NSPBTrap() then if EL3SDDUndef() then Undefined(); else AArch64_SystemAccessTrap(EL3, 0x18); end; else X{64}(t) = PMSFCR_EL1(); end; elsif PSTATE.EL == EL3 then X{64}(t) = PMSFCR_EL1(); end;
MSR PMSFCR_EL1, <Xt>
(op0 = 0b11, op1 = 0b000, CRn = 0b1001, CRm = 0b1001, op2 = 0b100)
if !IsFeatureImplemented(FEAT_SPE) then Undefined(); elsif HaveEL(EL3) && !(EffectivelyAtEL0InHost() || EffectivelyAtEL0NotInHost() || PSTATE.EL == EL3) && EL3SDDUndefPriority() && CheckMDCR_EL3_NSPBTrap() then Undefined(); elsif PSTATE.EL == EL0 then Undefined(); elsif PSTATE.EL == EL1 then if EL2Enabled() && IsFeatureImplemented(FEAT_FGT) && (!HaveEL(EL3) || SCR_EL3().FGTEn == '1') && HDFGWTR_EL2().PMSFCR_EL1 == '1' then AArch64_SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && MDCR_EL2().TPMS == '1' then AArch64_SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && CheckMDCR_EL3_NSPBTrap() then if EL3SDDUndef() then Undefined(); else AArch64_SystemAccessTrap(EL3, 0x18); end; else PMSFCR_EL1() = X{64}(t); end; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && CheckMDCR_EL3_NSPBTrap() then if EL3SDDUndef() then Undefined(); else AArch64_SystemAccessTrap(EL3, 0x18); end; else PMSFCR_EL1() = X{64}(t); end; elsif PSTATE.EL == EL3 then PMSFCR_EL1() = X{64}(t); end;
Version 2026.09 — Copyright © 2010-2026 Arm Limited or its affiliates.
This site is provided as a community resource and is NOT affiliated with nor endorsed by Arm Limited.